Lincoln Viking 2450 Battery and Parts Guide

← All Posts helmets Weld Gear Team

Owning a Viking means the occasional trip to the bench for maintenance, and knowing your Lincoln Viking 2450 battery and parts makes those trips painless. The 2450 shares most of its consumables with the rest of the Viking family, so once you learn its handful of replaceable pieces you will never be stuck waiting on a repair. This guide covers the battery it uses, how to change the lens, and which parts interchange with the 3350.

What the Viking 2450 uses

Like its siblings, the 2450 runs on replaceable CR2450 lithium coin cell batteries with solar assist. Its 4C auto-darkening cartridge is protected by an outside cover lens and an inside cover lens, and the X6 headgear carries a replaceable sweatband. Those are the parts you will handle: the battery, the two cover lenses, the sweatband, and, rarely, the headgear or the cartridge itself.

The quick answer: battery, lenses, and interchangeability

The Lincoln Viking 2450 battery is a CR2450, the same cell used across the premium Viking line. Change it when the low-battery indicator warns you or the lens starts to lag. For lenses, replace the outside cover lens whenever spatter or scratches cloud your view, and the inside cover lens only when it is damaged. As for interchangeability, the 2450 and 3350 share the same battery and the same X6 headgear, but their cover lenses differ in size because the 2450 has a smaller window. Always match cover lenses to the 2450 specifically.

Stock a few CR2450 cells and a pack of 2450-sized outside cover lenses and you are set for a long time.

How to replace the battery

Open the battery compartment on the cartridge, remove the old CR2450 cells, and check the contacts for corrosion. Seat fresh, quality CR2450 batteries with correct polarity and close the compartment. With solar assist doing part of the work, a good battery lasts a long time. If a new cell drains quickly, the usual culprits are corroded contacts or storing the helmet somewhere hot, not a defective helmet.

How to replace the lens

The outside cover lens is your routine consumable. When it pits or scratches, pop it out and snap in a fresh 2450-sized plate to restore the crisp 4C view. The inside cover lens comes out the same way and is replaced only when damaged. If the 4C cartridge itself stops darkening after you have confirmed a good battery and clean sensors, it can be replaced as a unit. Replace any cracked lens right away, since a damaged lens no longer guarantees the protection ANSI Z87.1 requires.[^https://www.osha.gov/sites/default/files/publications/OSHAFACTSHEET-EYEPROTECTION-DURING-WELDING.pdf]

Which parts interchange with the 3350

This is where welders get tripped up. The 2450 and 3350 share the CR2450 battery, the X6 headgear, sweatbands, and accessories like hard hat adapters and cheater lenses. What they do not share is cover lens size, because the 3350’s 12.5 square inch window is larger than the 2450’s 9.3 square inch window. So headgear and batteries swap freely, but cover lenses and the cartridge do not. Order cover lenses by model to avoid a part that will not seat.

Keeping the 2450 maintained

Maintaining a Lincoln Viking 2450 battery and parts is straightforward once you know the shared-versus-specific rule: batteries and headgear cross over with the 3350, cover lenses do not. Keep CR2450 cells and 2450 cover lenses on hand, swap them at the first sign of wear, and treat the 4C cartridge as the long-lasting core it is. Do that and the 2450 will serve for years.

Frequently asked questions

What battery does the Viking 2450 use? Replaceable CR2450 lithium coin cell batteries with solar assist, the same cell used across the premium Viking line.

Are 2450 parts interchangeable with the 3350? Partly. The battery, X6 headgear, sweatbands, and accessories interchange, but cover lenses and the cartridge do not, because the 2450 has a smaller window.

How do I replace the lens on a 2450? Pop out the outside cover lens and snap in a fresh 2450-sized plate. Replace the inside cover lens only if damaged, and the 4C cartridge only if it fails to darken after a good battery and clean sensors.

Why does my new battery drain fast? Usually corroded contacts or heat exposure. Clean the contacts, store the helmet cool, and use quality CR2450 cells.

Does the 2450 accept a cheater lens? Yes. It is compatible with magnifying cheater lenses in the inside lens slot.

When should I replace the whole cartridge? Only when the lens will not darken reliably after you have ruled out the battery and cleaned the sensors.

References

Recommended Guides
3M Speedglas 100 Review: The Entry Point That Still Says Speedglas
Recommended Guide

3M Speedglas 100 Review: The Entry Point That Still Says Speedglas

Read Guide →
3M Speedglas 9100 FX Review: The Flip-Up Built for Grinders
Recommended Guide

3M Speedglas 9100 FX Review: The Flip-Up Built for Grinders

Read Guide →
3M Speedglas 100 Series Battery and Lens Guide
Recommended Guide

3M Speedglas 100 Series Battery and Lens Guide

Read Guide →