gear apparel
Read Article What Is Weld Undercut? Causes Explained
Undercut is an unfilled groove at the weld toe that thins the joint and starts cracks. Learn what causes weld undercut, how to prevent it, and how much is acceptable.
Welding Gear Blog - Page 67
Browse our complete collection of auto-darkening helmet reviews, glove tests, protective jacket sizing guides, and welding safety checklists.
gear apparel
Read Article What Is Weld Penetration? Full vs Partial Penetration Explained
Weld penetration is how deep a weld fuses into the joint. Learn full vs partial penetration, what causes lack of penetration, and how to test it.
shop equipment
Read Article Why Are Welding Cart Top Shelves Built at an Angle?
Welding cart top shelves tilt back so you can see and reach the controls on a low machine, with easier cable bends and less sliding as bonuses.
learn
Read Article Why Do Welders Drink Milk After Welding Galvanized Steel?
Welders drink milk after welding galvanized steel out of myth, not science. Milk cant stop metal fume fever. Heres what actually protects you.
gear apparel
Read Article Where to Buy Welding Boots Online: Retailers, Red Flags, and Real Picks
The boot that arrived looking perfect on screen had a fake ASTM sticker and a sole that delaminates in month two. It happens. Online welding boot shopping has a...
gear apparel
Read Article Why Do Welding Gloves Smell So Bad (and How to Fix It)
Welding gloves smell from trapped sweat and bacteria in the leather, not fumes. Heres how to dry, deodorize, and clean them without ruining the leather.
learn
Read Article Why Do Welds Crack? Hot, Cold, and Crater Cracks Explained
Welds crack when stress beats the metal. Learn hot cracking, cold (hydrogen) cracking, and crater cracks, what causes each, and how to prevent them.
consumables
Read Article Wire Brush for Welding: Stainless vs Carbon Steel
Use a stainless wire brush on stainless and aluminum, a carbon steel brush on mild steel, and never mix them. Learn how to avoid contamination and which brushes to buy.
gear apparel
Read Article Wolverine Welding Boots Review: Are They Built for the Arc?
You pull on a boot for a 10-hour shift, run a bead overhead, and a glob of spatter lands square on the toe cap. If the leather buckles or the welt separates by...